产品规格参数
-
Ambient temperature range
+5 °C ... +35 °C
Temperature change maximum ±10 °C/h
With cooling device +5 °C ... +45 °C
Temperature change ±10 °C/h maximum; other temperatures on request -
Process temperature
≤ +1,300 °C
Depending on sampling probe -
Process pressure
800 hPa ... 1,200 hPa
应用领域
The MCS300P HW is a hot/wet extractive analyzer system for measuring gases. It detects IR- or VIS-active components with variable measuring ranges for monitoring and regulating combustion processes and exhaust gas purification systems. The heated system components prevent the water and acid dew points from being undercut. This results in low maintenance requirements, high reliability and long-term system stability, even under rough and difficult
application conditions.
Monitoring of flue gas conditioning in waste or sewage sludge incinerators
Monitoring of the scrubber in flue gas conditioning
Measurement directly at the kiln inlet in cement plants
Device properties:
Simultaneous measurement of up to 6 components plus O2
Temperature of the system components up to 200 °C
Automated sample point switching for up to 3 sample points
Automated adjustment to the zero and reference point
Integrated adjustment of the device without test gas
Flexible I/O module system
优势
Economic, automatic adjustment without expensive test gases
Easy remote control by integration in existing networks
Automatic control of the complete measuring system and probe
Low maintenance and reliable due to hot measurement
In combination with probe SCP3000 also for measurements at high dust loads and high temperatures
Short response time due to high sample gas flow
| FLEX产品选型 | 仪表技术性能 | 选型便捷程度 |
|---|---|---|
Fundamental选型 完美胜任基本测量任务 |
仪表技术性能
|
选型便捷程度
|
Lean选型 轻松应对关键工艺的测量挑战 |
仪表技术性能
|
选型便捷程度
|
Extended选型 创新技术助力工艺流程优化 |
仪表技术性能
|
选型便捷程度
|
Xpert选型 满足严苛工况的特殊测量要求 |
仪表技术性能
|
选型便捷程度
特殊选型 |
Loading alternative products
成功案例
-
-
《竞争力手册》（CP）
Emission Monitoring Solutions – broad instrument portfolio and longstanding experience
An overview brochure about emission monitoring, their measuring
principles and technologies, global requirements and services, a
selection guide and the measuring devices at a glance语言:
英语
版本:
01/01/2025
文件大小:
4.5 MB
文件名:
8029975_CP_Emission_Monitoring_Solutions_en_V3-0_2025.01_EHS.pdf
-
-
-
创新（IN）
Shelter Solutions – Space and protection for measurement and analysis technology
Shelter solutions are primarily used to protect the installed analyzer systems from extreme ambient conditions such as heat, cold,
dust, wind, earthquakes and corrosive or explosive atmospheres语言:
英语
版本:
01/01/2025
文件大小:
4.9 MB
文件名:
8030010_IN_Shelter_Solutions_en_V1-0_2025.01_EHS.pdf
-
-
-
创新（IN）
MCS300P HW – hot/wet extractive analyzer system for process gas measurements
The MCS300P HW is a hot/wet extractive analyzer system for measuring process gases.
语言:
英语
版本:
01/01/2025
文件大小:
2.1 MB
文件名:
8030618_IN_MCS300P HW_en_V1-0_2025.01_EHS.pdf
-
-
-
校验DTM
MCS300P HW SDD file
SOPAS device description file for MCS300P HW
语言:
Language neutral
版本:
13/04/2018
文件大小:
16 MB
文件名:
MCS300P HW SDD file
-